La Fibra

Equipamiento de red => Routers => Mikrotik => Mensaje iniciado por: ivimail en 13 de Diciembre de 2014, 03:23:26

Título: Ejemplo de balanceo para dos lineas
Publicado por: ivimail en 13 de Diciembre de 2014, 03:23:26
debes ajustarlo a tus necesidades especificas

Código: [Seleccionar]
/ip firewall mangle
add chain=input in-interface=WAN1 action=mark-connection new-connection-mark=WAN1_conn
add chain=input in-interface=WAN2 action=mark-connection new-connection-mark=WAN2_conn
 
add chain=output connection-mark=WAN1_conn action=mark-routing new-routing-mark=to_WAN1
add chain=output connection-mark=WAN2_conn action=mark-routing new-routing-mark=to_WAN2
 
add chain=prerouting dst-address=192.168.0.61/24 action=accept in-interface=ether3-master-local
add chain=prerouting dst-address=192.168.0.121/24 action=accept in-interface=ether3-master-local
 
add chain=prerouting dst-address-type=!local in-interface=ether3-master-local per-connection-classifier=both-addresses-and-ports:2/0 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes
add chain=prerouting dst-address-type=!local in-interface=ether3-master-local per-connection-classifier=both-addresses-and-ports:2/1 action=mark-connection new-connection-mark=WAN2_conn passthrough=yes
 
add chain=prerouting connection-mark=WAN1_conn in-interface=ether3-master-local action=mark-routing new-routing-mark=to_WAN1
add chain=prerouting connection-mark=WAN2_conn in-interface=ether3-master-local action=mark-routing new-routing-mark=to_WAN2
 
/ip route
add dst-address=0.0.0.0/0 gateway=192.168.0.61 routing-mark=to_WAN1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.0.121 routing-mark=to_WAN2 check-gateway=ping
 
add dst-address=0.0.0.0/0 gateway=192.168.0.61 distance=1 check-gateway=ping
add dst-address=0.0.0.0/0 gateway=192.168.0.121 distance=2 check-gateway=ping
 
/ip firewall nat
add chain=srcnat out-interface=WAN1 action=masquerade
add chain=srcnat out-interface=WAN2 action=masquerade