• Hola Visitante
  • Mostrar mensajes no leídos desde la última visita.
  • Mostrar nuevas respuestas a tus mensajes.

  • Mensajes recientes

    Páginas: 1 [2] 3 4 ... 10
    11
    Orange / Re:Instalación FTTH Orange paso a paso con fotos
    « Último mensaje por ertt en 21 de Mayo de 2017, 00:50:55 »
    a que te refieres?? no te entiendo
     ???
    12
    Orange / Re:Instalación FTTH Orange paso a paso con fotos
    « Último mensaje por ivimail en 21 de Mayo de 2017, 00:48:06 »
    @ertt por curiosidad se puede hacer algo con el slid en modo volatil?
    13
    Orange / Re:Vlan id TV Orange
    « Último mensaje por ivimail en 20 de Mayo de 2017, 12:49:03 »
    igual tienes que revisar las reglas del cortafuegos y adelantar las de la tv, no vaya a ser que tengas otras reglas que esten bloqueando el trafico.
    14
    Orange / Re:Ayuda con Adaptador para teléfono VOIP
    « Último mensaje por ivimail en 20 de Mayo de 2017, 12:46:40 »
    quizas deberias restaurar el cacharro y empezar de cero otra vez, con el tutorial para los cisco spa te tiene que valer para saber que poner en cada campo

    de todos modos imagino que el cacharro tendra logs de registro, revisalos a ver si te sale algun error por alguna parte
    15
    Orange / Re:Livebox Fibra
    « Último mensaje por error666 en 19 de Mayo de 2017, 01:25:42 »
    conector AJ4
    Código: [Seleccionar]
    NANDFLASH:
        block: 128KB(1024), page: 2KB, oob: 64Bytes
    nandflash_bbt_scan_block: detect bad block marker @ 0x6000000

    NVRAM(0) MAGIC checking passed!
    NVRAM(0) CRC checking passed!
    total 10 of NVRAM(0) entries loaded

    NVRAM(1) MAGIC checking passed!
    NVRAM(1) CRC checking passed!
    total 11 of NVRAM(1) entries loaded

    BOOTLOADER version 1.2.3 for PRV3399B_B_LT
    Build Date: Mon Sep 12 19:20:19 2016 (paul_shih@BuildBed)

    Chip ID: BCM68380B0 MIPS: 600MHz, DDR: 533MHz, Bus: 240MHz, RDP: 800MHz
    Memory Test Passed!
    Total Memory: 268435456 bytes (256MB)
    *** Press any key to stop auto run (0 seconds) ***
    Auto run second count down: 0
    Loading secondary image ...
    Finished loading 5242880 bytes
    DATE    : Mon Jan  9 17:50:15 2017
    VER     : v0.03.04.091
    CRC     : 375DF94B
    CRC OK!
    Signature OK!
    Decryption OK!
    Decompression OK!
    Code Address: 0x80010000, Entry Address: 0x8044dad0
    Starting program at 0x8044dad0
    D%GQuantenna Mini U-Boot
    Version: v37.4.0.28 Built: Oct 26 2015 at 19:23:50
    br
    1G-FD
    Using br device
    TFTP from server 1.1.1.1; our IP address is 1.1.1.2
    Filename 'u-boot.bin'.
    Load address: 0x88000000
    Loading: T ###############
    done
    Bytes transferred = 71768 (0x11858)
    Boot reached stage 13
    Boot reached stage 12
    Valid CRC found in flash restoring env...
    Boot reached stage 11
    hw_config_id 65535: 'QTM840_5S3_MAC'
    Cold boot
    Reset status: 0x00000001

    Info: data uncached: addr=0xc0000000 size=1024MB
    Info: text at 0x88040000, stack at 0x88013ffc(8192), heap at 0x88000000(73728), uboot size 177840
    Info: i-cache is enabled
    Info: d-cache is enabled
    Info: CPU freq is 500000000, dev freq is 125000000

    Info: Quantenna U-Boot version:v37.4.0.28
    Info: build date 'May 25 2016', time '16:28:25'

    SPI flash info:
            name             : mx25l512e
            jedec_id         : 0xc22010
            sector size      : 4096
            number of sector : 16
            frequency        : 104000000
            flags            : 0x2
            lock             :
    DDR_INIT: type = 16, speed = 2, size = 134217728

    ...

    No core dump generated
    [   20.420000] qdrv_radar_is_rdetection_required: ERROR - channel not yet set
    [   20.470000] Build name:            v37.4.0.62.1
    [   20.475000] Build revision:        45030
    [   20.480000] Build type:            SDK
    [   20.485000] Build timestamp:       1479324866
    [   20.490000] Platform ID:           432
    [   20.490000] Hardware ID:           QV840
    [   20.495000] Hardware revision:     bbic4_rev_a2
    [   20.500000] Band:                  5GHz
    [   20.505000] Kernel version:        2.6.35
    [   20.510000] Calibration version:   disabled
    [   20.515000] DC/IQ cal version:     V8.1
    [   20.515000] Power cal version:     V8.1
    [   20.520000] MuC firmware:          qtn_driver.qtn_ruby.0.bin
    [   20.525000] DSP firmware:          rdsp_driver.0.bin
    [   20.530000] AuC firmware:          auc_driver.0.bin
    [   20.535000] MAC address 0:         e4:3e:be:ef:88:64
    [   20.540000] MAC address 1:         00:00:00:00:00:00
    [   20.545000] U-Boot version:        v37.4.0.28
    Carrier ID 0, uboot update flag 0
    complete
    [   21.105000] MuC: Update MU debug flag from 0x20000000 to 0x00000000
    [   21.105000] MuC: MU enabled
    [   21.105000] AuC: Update mu flag : 0x00000000. Max delay = 0
    radar start with regulatory eu
    Stopping MAUI service
    MAUI Service started....
    Starting ntpclient
    /scripts/cmdloop starting /sbin/qharvestd, at 21:13:50 up 1 min, load average: 0.33, 0.14, 0.05
    qharvestd[notice]: qharvestd v1.27 started
    cat: can't open '/etc/custom/device-id': No such file or directory
    qharvestd[info]: rest for 120s (120s 0ms after adjustment)
    [  134.560000] qdrv_radar_is_rdetection_required: ERROR - channel not yet set
    [  134.560000] MuC: ioctl_power_save, level: 0 -> 5
    qharvestd[info]: start oauth processing at 200.614096855
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/auth/token
    qharvestd[info]: request: { "username": "1054|e4:3e:be:ef:88:64", "password": "0000", "grant_type": "password", "scope": "device" }
    qharvestd[error]: curl_easy_perform(): Empty reply from server

    qharvestd[info]: finish oauth processing at 262.303742771 (in 66639ms)
    qharvestd[info]: poll_request: exponential backoff scale is 3
    qharvestd[info]: next poll_request will be in 15 seconds
    qharvestd[info]: rest for 15s (0s 0ms after adjustment)
    qharvestd[info]: start oauth processing at 267.309620067
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/auth/token
    qharvestd[info]: request: { "username": "1054|e4:3e:be:ef:88:64", "password": "0000", "grant_type": "password", "scope": "device" }
    qharvestd[error]: curl_easy_perform(): Unknown SSL protocol error in connection to qharvest-prod.quantenna.com:443

    qharvestd[info]: finish oauth processing at 338.514272291 (in 61004ms)
    qharvestd[info]: poll_request: exponential backoff scale is 4
    qharvestd[info]: next poll_request will be in 23 seconds
    qharvestd[info]: rest for 23s (0s 0ms after adjustment)
    qharvestd[info]: start oauth processing at 328.519580191
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/auth/token
    qharvestd[info]: request: { "username": "1054|e4:3e:be:ef:88:64", "password": "0000", "grant_type": "password", "scope": "device" }
    qharvestd[error]: curl_easy_perform(): Empty reply from server

    qharvestd[info]: finish oauth processing at 391.321434571 (in 65703ms)
    qharvestd[info]: poll_request: exponential backoff scale is 5
    qharvestd[info]: next poll_request will be in 50 seconds
    qharvestd[info]: rest for 50s (0s 0ms after adjustment)
    qharvestd[info]: start oauth processing at 391.325444051
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/auth/token
    qharvestd[info]: request: { "username": "1054|e4:3e:be:ef:88:64", "password": "0000", "grant_type": "password", "scope": "device" }
    qharvestd[error]: curl_easy_perform(): Unknown SSL protocol error in connection to qharvest-prod.quantenna.com:443


    > fqharvestd[info]: start oauth processing at 464.46567354
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/auth/token
    qharvestd[info]: request: { "username": "1054|e4:3e:be:ef:88:64", "password": "0000", "grant_type": "password", "scope": "device" }
    g
    > qharvestd[info]: response: { "access_token": "rTdTETG644DFdsfsfsvfg083lxnlkdjfcDFTTsdjldsljd037dsFSDAHfder9937Sfdsfthfvcxlshgfzjzjk836jd9dhaGTGDaiidcsYslkkhs082dsdDDewda34dwddsDDe32gj633gbsfGD", "scope": "device", "expires_in": 86400 }
    qharvestd[info]: finish oauth processing at 464.86533678 (in 868ms)
    qharvestd[info]: start poll_request processing at 464.743508298
    qharvestd[info]: Cause Register: e0000010 : 00000009
    qharvestd[info]: carrier_id: 0
    qharvestd[info]: SSID_str: MiFibra-8861-5G
    qharvestd[info]: SSID_str: Invitado-8861
    qharvestd[info]: health_flags: 0
    qharvestd[info]: target: https://qharvest-prod.quantenna.com/api/poll
    qharvestd[info]: request: { "version": 3, "mac_addr": "e4:3e:be:ef:88:64"", "timestamp": "2017-02-31 23:52:28", "current_firmware_version": "37.4.0.62n432-1.27", "wifi_mode": "ap", "uptime": 3565, "reboot_cause": 1, "carrier_id": 0, "region": "es", "interfaces": [ { "name": "wifi0", "physical": "wifi0", "bssid": "e4:3e:be:ef:88:64"", "ssid": "MiFibra-8861-5G", "channel": 60, "bw": 80, "protocol": 16 }, { "name": "wifi1", "physical": "wifi0", "bssid": "e4:3e:be:ef:88:64"", "ssid": "Invitado-8861" } ] }
    qharvestd[info]: response: { "poll_url": "https:\/\/qharvest-prod.quantenna.com\/api", "poll_enable": true, "poll_interval": 14400, "upgrade_enable": false, "upgrade_interval": 86400, "config_enable": true, "config_interval": 42300, "log_assoc_table_enable": false, "log_assoc_table_interval": 86400, "log_phy_stats_enable": false, "log_phy_stats_interval": 86400, "log_messages_enable": true, "log_messages_interval": 10800, "log_vsp_strms_enable": false, "log_vsp_strms_interval": 86400, "log_scs_report_current_enable": false, "log_scs_report_current_interval": 86400, "log_scs_report_all_enable": false, "log_scs_report_all_interval": 86400, "log_scs_report_autochan_enable": false, "log_scs_report_autochan_interval": 31536000, "log_vsp_stats_enable": false, "log_vsp_stats_interval": 86400, "config_vsp_enable": false, "config_vsp_interval": 86400, "log_gather_info_enable": false, "log_gather_info_interval": 86400, "log_scan_enable": true, "log_scan_interval": 14400, "bidicmd_enable": true, "bidicmd_interval": 300, "log_capabilities_enable": false, "log_capabilities_interval": 86400, "dynamic_polling_enable": false, "dynamic_polling_interval": 0, "dynamic_polling_smooth": 0.000000, "log_bundled_stats_enable": true, "log_bundled_stats_interval": 7200, "wss_url": "https:\/\/qharvest-prod.quantenna.com:8443\/", "dynamic_polling_thresholds": { "cnt_sp_fail": 0, "cca_idle": 0, "cnt_lp_fail": 0, "rssi": 0, "cca_int": 0, "tx_phy_rate": 0 }, "log_bundled_stats_delay": 6276, "config_vsp_delay": 49464, "log_capabilities_delay": 49472, "log_scs_report_autochan_delay": 49460, "log_scs_report_all_delay": 49458, "log_gather_info_delay": 49466, "log_vsp_strms_delay": 49454, "log_phy_stats_delay": 49450, "bidicmd_delay": 270, "log_scs_report_current_delay": 49456, "log_messages_delay": 6252, "log_scan_delay": 6268, "poll_delay": 14400, "config_delay": 18846, "upgrade_delay": 49444, "log_assoc_table_delay": 49448, "dynamic_polling_delay": null, "log_vsp_stats_delay": 49462 }
    qharvestd[info]: response.redirect_url same as config.base_url
    qharvestd[info]: poll_request: [was]enabled=[-1]1, delay=14400, interval=14400, timeout=14400
    qharvestd[info]: config_request: [was]enabled=[0]1, delay=18846, interval=42300, timeout=18846
    qharvestd[info]: log_gather_info_request: [was]enabled=[0]0, delay=49466, interval=86400, timeout=0
    qharvestd[info]: log_messages_request: [was]enabled=[0]1, delay=6252, interval=10800, timeout=6252
    qharvestd[info]: config_vsp_request: [was]enabled=[0]0, delay=49464, interval=86400, timeout=0
    qharvestd[info]: log_message_vsp_strms_request: [was]enabled=[0]0, delay=49454, interval=86400, timeout=0
    qharvestd[info]: log_message_vsp_stats_request: [was]enabled=[0]0, delay=49462, interval=86400, timeout=0
    qharvestd[info]: log_message_scs_report_all_request: [was]enabled=[0]0, delay=49458, interval=86400, timeout=0
    qharvestd[info]: log_message_scs_report_autochan_request: [was]enabled=[0]0, delay=49460, interval=31536000, timeout=0
    qharvestd[info]: log_scan_request: [was]enabled=[0]1, delay=6268, interval=14400, timeout=6268
    qharvestd[info]: upgrade_request: [was]enabled=[0]0, delay=49444, interval=86400, timeout=0
    qharvestd[info]: check_health: [was]enabled=[0]0, delay=0, interval=0, timeout=0
    qharvestd[info]: log_capabilities_request: [was]enabled=[0]0, delay=49472, interval=86400, timeout=0
    qharvestd[info]: log_bundled_stats_request: [was]enabled=[0]1, delay=6276, interval=7200, timeout=6276
    qharvestd[info]: got new bidicmd_url: https://qharvest-prod.quantenna.com:8443/
    qharvestd[info]: finish poll_request processing at 565.118835926 (in 254ms)
    qharvestd[info]: next poll_request will be in 14400 seconds
    qharvestd[info]: rest for 6252s (6251s 746ms after adjustment)
    qharvestd[info]: reschedule in 500ms
    qharvestd[info]: start log_bidicmd_request processing at 465.626643598
    qharvestd[info]: Connected to https://qharvest-prod.quantenna.com:8443/
    qharvestd[info]: finish log_bidicmd_request processing at 466.643776222 (in 500ms)
    qharvestd[info]: rest for 6251s (6250s 500ms after adjustment
    16
    Orange / Re:Livebox Fibra
    « Último mensaje por error666 en 19 de Mayo de 2017, 00:22:48 »
    Páginas web

    Código: [Seleccionar]
    advanced_administration.htm
    advanced_firewall_customize.htm
    advanced_firewall_customizev6.htm
    advanced_firewall.htm
    advanced_internet.htm
    advanced_network_configuration.htm
    advanced_network_dmz.htm
    advanced_network_dns.htm
    advanced_network_dyndns.htm
    advanced_network_nat.htm
    advanced_network_ntp.htm
    advanced_network_upnp.htm
    advanced_notifications.htm
    advanced_printer_server.htm
    advanced_SPI.htm
    advanced_user_remote_access.htm
    fileserver.htm
    filesFtpAcc.htm
    files.htm
    firmware_upgrade.htm
    firstconnection.htm
    forbidden.htm
    help.htm
    hidden_factory.htm
    hurl_diagnostic_aclblock.htm
    hurl_diagnostic_internet.htm
    hurl_diagnostic_internet_start.htm
    hurl_diagnostic_ptro.htm
    index.htm
    indexRemote.htm
    inform_boot.htm
    inform_upgrade.htm
    internetpwd.htm
    lan_portMode.htm
    legal_information.htm
    loginduperr.htm
    loginerr.htm
    login.htm
    loginRemote.htm
    multicast.htm
    nas_addUser.htm
    nas_admin.htm
    nas_basic.htm
    nas_sharedFolder.htm
    nat.htm
    network_connected.htm
    network_disconnected.htm
    phones.htm
    softphones.htm
    status_authpage.htm
    status.htm
    status_real.htm
    support_backup.htm
    support_customer.htm
    support_factory.htm
    support_firmware.htm
    support_information_adsl.htm
    support_information_ftth.htm
    support_information.htm
    support_information_internet.htm
    support_information_lan.htm
    support_information_tv.htm
    support_information_usb.htm
    support_information_voip.htm
    support_information_wifi5G.htm
    support_information_wifi.htm
    support_leds.htm
    support_restart.htm
    support_restore.htm
    sysok.htm
    tc2aketru85y.htm
    top.htm
    topRemote.htm
    urlBlocking.htm
    uuw5efex42up.htm
    voice_status.htm
    w8uy5ku2eyug.htm
    wait.htm
    wifi_advanced.htm
    wifi_darmowe.htm
    wifi_guest.htm
    wifi_main.htm
    wifi_scheduling.htm
    wifi_settings.htm
    x6etha2ru53d.htm
    yep8at3xaw49.htm
    zef2kufub57e.htm
    zVbhYXPj4mBziXh.htm

    cgi

    Código: [Seleccionar]
    cgi_authpage.js
    cgi_bridged_lan.js
    cgi_broadbandHidden.js
    cgi_broadband.js
    cgi_ddns.js
    cgi_dns.js
    cgi_evtlog.js
    cgi_firewall.js
    cgi_firmware.js
    cgi_fw_access_control.js
    cgi_fw_customize.js
    cgi_fw_customizeV6.js
    cgi_fw_dmz.js
    cgi_home.js
    cgi_infoFtth.js
    cgi_infoInternet.js
    cgi_info.js
    cgi_infoLan.js
    cgi_infoSip.js
    cgi_infoUSB.js
    cgi_infoWifi.js
    cgi_lan_ipv6.js
    cgi_lan.js
    cgi_lan_portMode.js
    cgi_leds.js
    cgi_multicast.js
    cgi_nas.js
    cgi_nat.js
    cgi_network_acl.js
    cgi_network_connected.js
    cgi_network_customize.js
    cgi_network_disconnected.js
    cgi_ntp.js
    cgi_phones.js
    cgi_portForwarding.js
    cgi_portloopdetect.js
    cgi_predefined_app.js
    cgi_predefined_ipv6app.js
    cgi_qos.js
    cgi_qos_rule.js
    cgi_qos_shaping.js
    cgi_remote_access.js
    cgi_remote_mgmt.js
    cgi_route.js
    cgi_securePassword.js
    cgi_settings.js
    cgi_softphones.js
    cgi_status.js
    cgi_sys_slid.js
    cgi_sys_smtp.js
    cgi_system.js
    cgi_tr69.js
    cgi_upnp.js
    cgi_URLblocking.js
    cgi_usb_dlna.js
    cgi_usb_printer.js
    cgi_voice_addUser.js
    cgi_voiceAdvanced.js
    cgi_voiceConnections.js
    cgi_voiceExtensionsIN.js
    cgi_voiceExtensionsOUT.js
    cgi_voicePhone.js
    cgi_voice_status.js
    cgi_wan_iptv.js
    cgi_wan.js
    cgi_wan_pon.js
    cgi_wan_veip_bridge.js
    cgi_wan_voip.js
    cgi_wifi.js
    cgi_wifi_logo.js
    cgi_wifi_ssid.js
    cgi_wireless.js
    renewPi.js
    17
    Orange / Re:Livebox Fibra
    « Último mensaje por error666 en 19 de Mayo de 2017, 00:08:09 »
    Conector J5

    Código: [Seleccionar]
    NANDFLASH:
        DEVICE ID: 0x98f18015f2, size: 131072KB, type: SLC
        block: 128KB(1024), page: 2KB, oob: 64Bytes
    nandflash_bbt_scan_block: detect bad block marker @ 0x6000000

    NVRAM(0) MAGIC checking passed!
    NVRAM(0) CRC checking passed!
    total 10 of NVRAM(0) entries loaded

    NVRAM(1) MAGIC checking passed!
    NVRAM(1) CRC checking passed!
    total 11 of NVRAM(1) entries loaded

    BOOTLOADER version 1.2.3 for PRV3399B_B_LT
    Build Date: Mon Sep 12 19:20:19 2016 (paul_shih@BuildBed)

    Chip ID: BCM68380B0 MIPS: 600MHz, DDR: 533MHz, Bus: 240MHz, RDP: 800MHz
    Memory Test Passed!
    Total Memory: 268435456 bytes (256MB)
    Board IP address        192.168.1.1
    Board IP netmask        255.255.255.0
    Gateway IP address      0.0.0.0
    Server IP address       192.168.1.99
    Boot image (1 or 2)     2
    Temp boot (0, 1 or 2)   0
    Boot countdown delay (0 to 3)   0
    GPON serial number      41-52-4C-54-63-69-88-69
    GPON password           30-32-33-33-38-39-36-39-57-62
    Serial number           ARLT63698869
    MAC address number      4
    MAC address base        E4-3E-BE-EF-88-61
    Wireless SSID   8861
    Wireless key    ubotDE39
    Wireless WPS pin        66889922
    Admin password  ubotDE39
    Hardware version        R02
    Manufacturing mode (0 or 1)     0
    *** Press any key to stop auto run (0 seconds) ***
    Auto run second count down: 0
    Loading secondary bootram ...
    Decryption OK!
    Decompression OK!
    Entry at 0x8b500000
    Starting program at 0x8b500000
    ----


    http://www.rapidtables.com/convert/number/hex-to-ascii.htm
    GPON serial number      41-52-4C-54-63-69-88-69                 ---> 41-52-4C-54 (ARLT)63698869
    GPON password           30-32-33-33-38-39-36-39-57-62        ----> 02338969Wb

    Parametros del sistema---general
    1.1 fabricante        Arcadyan
    1.2 modelo            PRV3399B_B_LT
    1.3 operador          Orange / Jazztel
    1.4 número de serie   ARLT63698869
    1.5 dirección MAC     E4-3E-BE-EF-88-61


    Parametros del sistema---FIBRA
    2.7 contraseña de ONT   02338969Wb (0x30323333383936395762)





    18
    Orange / Re:NUEVO Tutorial para extraer los datos del telefono SIP Orange adsl y fibra
    « Último mensaje por ibaitxo en 18 de Mayo de 2017, 08:42:50 »
    Si alguien podría ayudarme se lo agradecería. El tema es que sigo todos los pasos correctamente pero a la hora de importar el archivo nueva_config.bin me da error. Hasta donde he llegado el error surge por modificar el texto hexadecimal, nose si será por el programa(xvi32). Al modificarlo no me da ningún error pero al adjuntarlo en la configuración del router sí, y si a este archivo no le modifico el texto hexadecimal no me aparece el error si lo adjunto. Actualización del Firmware: 00.96.607B
    19
    Orange / Re:Vlan id TV Orange
    « Último mensaje por CarlitoxxPro en 17 de Mayo de 2017, 14:16:29 »
    También he conseguido verla durante unos minutos y luego nunca mas, ni apagando y encendiendo el mikrotik ni nada, has conseguido algún avance con este tema?


    Buenas

    Esta es la config con la que he conseguido que funcione los canales IPTV.

    No es la config total de mi router ... cada cual tendra que hace pequeños cambios para que funcione en su propio router

    En mi router está configurado sobre ether1-gateway la salida a internet y sobre ether5-master-local el STB.

    .......

    Mi experiencia me ha indicado que para que funcione el igmp-proxy por la vlan 838 debe hacerse en v2, pero no hay manera de forzarlo en Routeros, y en algunas configuraciones que probé, el MKT lo mandaba en IGMPv3 y no unia al grupo multicast.
    La unica manera qu ehe encontrado para que lo haga es permitiendo que todas las interfaces en la config del igp-proxy

    Puede que haya que ajustar los tiempos del set query-interval y el query response-interval para tener estabilidad, lo iremos viendo en los proximos dias.

    Un saludo a todos
    20
    Orange / Re:Livebox Fibra
    « Último mensaje por barriteleves en 16 de Mayo de 2017, 13:17:50 »
     hola compañeros:

    Citar
    WTF Arcadyan PRV3399B, WTF.

    root:$1$asi.SHd2$JCPRwCn6UU2siB1dROq6P.:0:0:root:/root:/bin/ash

    P.S.: root1234
    P.P.S.: Nowhere to use that :(


    he leido esto en twitter de un prestigioso borja.

    y estos:
    Citar
    An admin user and password I found in a config file on the Livebox (Arcadyan PRV3399B - /cgi/cgi_system.js): liveboxfibra:liveboxfibra!


    haber si os vale de algo yo aun no he tenido resultados ni mucho tiempo espero dentro de unos dias poder trastearlo un buen rato. suerte

    siento no haber podido pedir autorizacion para publicarlo ya que no tengo acceso a twiter pero desde aqui asi lo pido espero si no te moletas borja que esto  este aqui tambien para ayudar ha otros para sus necesidades de algunos datos con fines individuales y honestos.
    Páginas: 1 [2] 3 4 ... 10